Quick Reminders...
Clean treated surfaces only with acid-free and non-abrasive cleaners. A PH of 8.5 - 9.5 are best. DO
NOT use bleach or ammonia.
Begin with a clean surface.. Sealers and/or waxes must be removed.
It is recommended that
a small sample area or piece of tile be treated first.
One gallon of Tile-Grip will cover approximately 400 sq. ft. However,
working outdoors on windy or sunny days might require more Tile_Grip due to a higher evaporation rate.
Heavy traffic
areas should be treated annually. For more information or questions, please contact J.C. Stephenson Distributing at info@tilegripantislip.com or
call (561) 313-0375.